Mason jar diy ideas

greatest mason jar diy ideas is right here , free download

3 Creative Ideas to Make Hummingbird Feeders at Home

Watching birds at the feeder in your garden or backyard is one of the ways to enjoy birdwatching. It is also considered to be an inexpensive pastime because all it requires is the naked eye to watch birds. But let's go one step further to attract more birds in the backyard. Planting bird feeders is something that will be enjoyed, not only by you, but also by birds around.

Did You Know?

A shady spot ensures a leakproof feeder because when the sun heats up the sugar, the air pressure rises, thereby causing leakage.

Making hummingbird feeders at home is not only easy, but also rewarding. Recycle that empty wine bottle from your kitchen or the vacant mason jar in your attic as a substitute for spending on store-bought models for bird feeders. It is a treat to the eye to see hummingbirds feast on these feeders.

There are a number of ways to create these hummingbird feeders. We are sure that after reading this write-up, you will thank us every morning. Because after making these hummingbird feeders, there will not be a single morning when you will not hear those birds chirping and fluttering their tiny wings outside your window.

With a Wine Bottle

❥ Choose an empty wine bottle preferably in red or you can paint it red. This is because the color red attracts hummingbirds. It is like a signal saying "food here!" Through the cork, drill a hole.

❥ Fill the bottle with nectar, and seal the bottle with the same rubber cork. For making the nectar, take 1 tablespoon of granulated white sugar and about 450 ml of boiling water. Mix the solution and let it attain room temperature.

❥ Thereby you should take a straw-like pipe and tightly insert it into the hole of the cork. This should be done such that the nectar in the bottle easily passes through the straw.

❥ Now find a cool, shady place where you are expecting the birds to come and feed on the feeder.

❥ Here you can tie up the bottle with wires or ropes, through a firm foundation in a slanting position.

Voila! Your new wine bottle hummingbird feeder is ready.

(Note: The same procedure can be followed while making a hummingbird feeder with a mason jar and with a plastic bottle, which have been explained below.)

With a Plastic Bottle

❥ Initially, take a plastic bottle and clean it thoroughly.

❥ Now drill a hole on the bottle of the cap.

❥ Then glue the cap upside down inside the top of the bottle. Remember to leave one-fourth inch of the cap sticking out of the bottle.

❥ After this, you can either hang the bottle through a copper wire (mentioned above) on to a firm support. You can also drill a hole through the bottom of the bottle, thereby screwing a hook in snug, and suspend it through a support.

❥ Do not forget to fill the bottle with the nectar before sealing it. The plastic feeder is ready to be used.

With a Mason Jar

❥ A mason jar, unlike a plastic bottle or a wine bottle, is heavy, and keeping it securely suspended through a support can be a hassle. Nevertheless, the similar procedure of cage formation through a copper wire can be followed.

❥ After this, the lid has to be glued tightly to the mouth of the bottle. Drill holes through the lid, and fix tubes through the holes. These holes will be the feeders for the hummingbirds.

Hummingbird Feeder Design Ideas

How Can You Maintain Hygiene?

❥ In order to be a sensible host, make sure that the feeders are sterilized or cleaned properly before using.

❥ The feeders should be selected wisely. They should be easy to clean.