एक Arduino संचालित ब्लूटूथ कार को नियंत्रण बाइट्स भेजें

NOTE: This app is of no use whatsoever without a corresponding Bluetooth enabled device designed to accept the correct serial commands. So unless you know what to use this app for, don't bother downloading it. See my website for details.

http://uzzors2k.4hv.org/index.php?page=blucar

This is just a small app which sends predefined bytes via Bluetooth to another Bluetooth serial module. Steering is via the accelerometer, and throttle/direction with two buttons. Settings are present to reverse the servo and motor default directions. Settings are also present to adjust the servo range, center offset, and left/right limits.

This app can be used to control a modified RC car, and construction details are freely available on my website.